Panasonic AJ-SPD850P manual User menu Interface

Setup menus (continued)

USER menu <INTERFACE>

No./Item		Description
201	This selects whether the REMOTE
	(9P) connector functions when the
9P SEL	REMOTE button is lit.
	0000	OFF :
	Connector does not function.
	0001	ON : Connector functions.
202	This sets the ID information to be
	returned to the controller.
ID SEL
	0000	OTHER
	0001	DVCPRO
	0002	ORIG
	Notes:
	• ID information of any VTR except for
	the DVCPRO’s is set in OTHER.
	• Select ORIG only when the unit has
	been connected to the specified
	controller.
204	This selects whether the RS-232C
	connector functions when the
RS232C SEL	REMOTE button is lit.
	0000	OFF :
	Connector does not function.
	0001	ON : Connector functions.
205	These settings are for selecting the
	RS-232C communication speed (baud
BAUD RATE	rate). (Unit: Bps)
	0000	300
	0001	600
	0002	1200
	0003	2400
	0004	4800
	0005	9600
206	These settings are for selecting the
	RS-232C data length. (Unit: bit)
DATA LENGTH
	0000	7
	0001	8
207	These settings are for selecting the
	RS-232C stop bit length. (Unit: bit)
STOP BIT
	0000	1
	0001	2

The underlined items indicates the initial setting.

No./Item		Description
208	These settings are for selecting the
	none, odd or even for the RS-232C
PARITY	parity bit.
	0000	NON :
	Parity bit is not used.
	0001	ODD:
	An odd number of bits is used for the
	parity system.
	0002	EVEN:
	An even number of bits is used for the
	parity system.
209	These settings are for selecting
	whether the ACK code is to be
RETURN ACK	returned when a command is received
	from RS-232C.
	0000	OFF : ACK code is not returned.
	0001	ON : ACK code is returned.

50