Panasonic AJ-SPD850P manual Teletext, Det, REC LINE13, REC LINE15, Blank Line, Manu

Setup menus (continued)

USER menu <V BLANK>

No./Item Description

803This selects the method used to detect the lines in which the teletext

TELETEXT	signals are to be recorded.
DET
	0000	OFF :
	The teletext signals are not recorded.
	0001	AUTO :

The teletext signals are automatically detected and recorded.

0002 MANU :

The lines in which the teletext signals are to be recorded are selected and set.

Notes:

•The number of lines in which the teletext signals can be recorded depends on the number of recording lines which was entered as the setup menu No. 800 (ADD LINE 25) or No. 801 (ADD LINE 50) setting. [See “Number of lines which can be set for TELETEXT.”]

•When setting “MANU” is selected and the STOP button is pressed, operation transfers to the sub-screen, and the number of recording lines can be selected.

To return from the sub-screen, press the STOP button again.

•When the input signal is a non-standard signal or N-STD has been selected for the setup menu No. 303 (STD/NON- STD) setting, teletext signals will not be played back correctly in EE mode.

Sub-screen

[525i system]	This selects the lines in which the
00	teletext signals are to be recorded.
REC LINE1
:	[525i system]		[625i system]
12	0000	OFF	0000	OFF
REC LINE13	0001	10&273	0001	7&320
	0002	11&274	0002	8&321
[625i system]	0003	12&275	0003	9&322
00	0004	13&276	0004	10&323
REC LINE1	0005	14&277	0005	11&324
:	0006	15&278	0006	12&325
14	0007	16&279	0007	13&326
REC LINE15	0008	17&280	0008	14&327
	0009	18&281	0009	15&328
	0010	19&282	0010	16&329
	0011	20&283	0011	17&330
	0012	21&284	0012	18&331
	0013	22	0013	19&332
			0014	20&333
			0015	21&334
			0016	22

The underlined items indicates the initial setting.

No./Item		Description
804	This turns the blanking ON or OFF in
	the vertical blanking period of the
BLANK LINE	video output signals.
	0000 BLANK :
	Blanking is effected forcibly for all
	lines.
	0001	THRU :
	No blanking is effected for any of the
	lines.
	0002	MANU :
	Blanking ON or OFF is selected for
	each line.
	Note:
	When setting “MANU” is selected and
	the STOP button is pressed, operation
	transfers to the subscreen, and ON or
	OFF can be selected for each line. To
	return from the sub-screen, press the
	STOP button again.
Sub-screen
[525i system]	0000 BLANK :
00	Blanking is forcibly effected.
LINE 10&273	0001 THRU : No blanking is effected.
:
11
LINE 21&284
[625i system]
00
LINE 7&320
:
15
LINE 22&335

60