Installing the Battery
To install the battery, replace the battery, or to access your phone’s ESN (electronic serial number), you must first remove the phone back cover.
Note: Before removing the cover, always switch off the power and disconnect the charger and any other device. Avoid touching electronic components while changing the covers. Always store and use the device with the covers attached.
To remove the back cover, turn the phone upside down, press the release button down, and push the back cover away.
To install the Li-Ion battery:
1.Insert the battery into the cavity at a
2.Press down gently until the battery snaps into place.
Section 2A: Your Sprint PCS Phone - The Basics | 18 |