Nokia V-6016i manual Getting the Most Out of Your Reception

Getting the Most Out of Your Reception

Keeping Tabs on Signal Strength

The quality of each call you make or receive depends on the signal strength in your area. Your phone informs you of the current signal strength by displaying a number of bars next to the signal strength icon. The more bars displayed, the stronger the signal. If you’re inside a building, being near a window may give you better reception.

Understanding the Power Save Feature

If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is automatically activated. If your phone is active, it periodically rechecks service availability; you can also check it yourself by pressing any key. Anytime the Power Save feature is activated, a message is displayed on the screen. When a signal is found, your phone returns to standby mode.

Understanding How Your Phone Operates

Your phone is basically a radio transmitter and receiver. When it’s turned on, it receives and transmits radiofrequency (RF) signals. When you use your phone, the system handling your call controls the power level. This power can range from 0.00001 watts to 0.373 watts in digital mode, depending upon in which band your phone operates.

Knowing Radiofrequency Safety

The design of your Sprint PCS Voice Phone complies with updated NCRP standards described below.

In 1991-92, the Institute of Electrical and Electronics Engineers (IEEE) and the American National Standards Institute (ANSI) joined in updating ANSI’s 1982 standard for safety levels with respect to human exposure to RF signals. More than 120 scientists, engineers and physicians from universities, government health agencies and industries developed this updated standard after reviewing the available body of research. In 1993, the Federal Communications Commission (FCC) adopted this updated standard in a regulation. In August 1996, the FCC adopted hybrid standard consisting of the existing ANSI/IEEE standard and the guidelines published by the National Council of Radiation Protection and Measurements (NCRP).

Maintaining Your Phone’s Peak Performance

There are several simple guidelines to operating your phone properly and maintaining safe, satisfactory service.

⬤Speak directly into the mouthpiece.

⬤Avoid exposing your phone and accessories to rain or liquid spills. If your phone does get wet, immediately turn the power off, remove the battery, and dry thoroughly.

⬤For optimal performance, store and use your phone between a temperature range of 23ºF and 140ºF (-5ºC and 60ºC).

⬤Do not use or store your phone in dusty, dirty areas. Its moving parts and electronic components can be damaged.

⬤Do not attempt to open your phone other than as instructed in this guide.

⬤Do not drop, knock or shake your phone. Rough handling can break internal circuit boards and fine mechanics.

⬤Do not use harsh chemicals, cleaning solvents, or strong detergents to clean your phone.

Section 4A: Safety Guidelines 123