Nokia V-6016i manual Connecting Accessories, Using the Desktop Charger

Using the Desktop Charger

To use the desktop charger provided with your phone:

1.Install the phone battery in the phone.

2.Plug the prongs of the adapter into an electrical outlet.

3. Plug the round end of the AC adapter into the desktop charger and insert the phone into the charger slot.

– or –

Plug the adapter directly into the charger jack on the phone,

if the charger stand is not used. (If the phone is on, the screen briefly displays a “Charging” message followed immediately by a scrolling battery strength indicator. If the phone is off, the screen displays “Phone off. Battery charging.”)

4.When the battery is fully charged, unplug the phone from the charger. (If the phone is on, the battery strength indicator stops scrolling. The screen displays “Phone off. Charge completed” if the phone is off.)

With the Sprint-approved Li-Ion battery, you can recharge the battery before it becomes completely run down.

Warning! Unplug the charger from the electrical plug and the device when not in use. Do not leave the battery connected to the charger. Overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time. Temperature extremes can affect the ability of your battery to charge.

Connecting Accessories

Headset accessories can be connected using the universal headset jack on the side of your phone or the Nokia Pop-Port connector. Using the headset and the keypad of your phone, you can make and answer calls as usual.

Section 2A: Your Sprint PCS Phone - The Basics 20