Beko BK 5200, BK 6300 user manual With wire clip, Installation

Installation of indoor unit

2.Make the power connection wire go through the cable-cross hole at the back of indoor unit and then pull it out from the front side.

cable-cross hole

power connection wire

3.Remove the wire clip; connect the power connection wire to the wiring terminal

DFFRUGLQJWRWKHFRORUWLJKWHQWKHVFUHZDQGWKHQ¿[WKHSRZHUFRQQHFWLRQZLUH

with wire clip.

18、24K Heat pump type:

N(1) 2 3

blue black brown

yellow- green

Outdoor unit connection

4.Put wiring cover back and then tighten the screw. 5.Close the panel.

Note:

Ɣ$OOZLUHVRILQGRRUXQLWDQGRXWGRRUXQLWVKRXOGEHFRQQHFWHGE\DSURIHVVLRQDO Ɣ,IWKHOHQJWKRISRZHUFRQQHFWLRQZLUHLVLQVXI¿FLHQWSOHDVHFRQWDFWWKHVXSSOLHU

IRUDQHZRQH$YRLGH[WHQGLQJWKHZLUHE\\RXUVHOI Ɣ)RUWKHDLUFRQGLWLRQHUZLWKSOXJWKHSOXJVKRXOGEHUHDFKDEOHDIWHU¿QLVKLQJ

installation.

Ɣ)RUWKHDLUFRQGLWLRQHUZLWKRXWSOXJDQFLUFXLWEUHDNPXVWEHLQVWDOOHGLQWKHOLQH The circuit break should be all-pole parting and the contact parting distance should be more than 3mm.

23