Installation of indoor unit
Step eight: bind up pipe
1.Bind up the connection pipe, power cord and drain hose with the band.
indoor and outdoor power cord
indoor unit | gas |
|
pipe
liquid pipe
band
drain hose
2.Reserve a certain length of drain hose and power cord for installation when binding them. When binding to a certain degree, separate the indoor power and then separate the drain hose.
connection pipe | drain hose | band |
|
|
indoor power cord
3.Bind them evenly.
4.The liquid pipe and gas pipe should be bound separately at the end.
Note:
Ɣ7KHSRZHUFRUGDQGFRQWUROZLUH
FDQ WEHFURVVHGRUZLQGLQJ
Ɣ7KHGUDLQKRVHVKRXOGEHERXQG at the bottom.
Step nine: hang the indoor unit
1.Put the bound pipes in the wall pipe and then make them pass through the wall hole.
2.Hang the indoor unit on the
3.Stuff the gap between pipes and wall hole with sealing gum.
4.Fix the wall pipe.
&KHFNLIWKHLQGRRUXQLWLVLQVWDOOHG¿UPO\DQGFORVHGWRWKHZDOO
indoor | outdoor | upper hook |
wall pipe
sealing gum
lower hook of wall-mounting frame
Note:
Ɣ'RQRWEHQGWKHGUDLQKRVHWRRH[FHVVLYHO\LQRUGHUWRSUHYHQWEORFNLQJ
24
