Publication No. GEG-99197 May04
7-6 TallyGenicom mL450 Laser Printer User Manual
Installing a FLASH DIMM Module
4. Carefully insert a FLASH DIMM module in FLASH DIMM slot as shown below. When
properly seated, gently push down on the DIMM until the white braces close onto the ends
of the DIMM.
NOTE: To remove the FLASH DIMM, pull the white braces away from the ends of the DI MM until the
DIMM snaps out of the slot.
5. Reinstall the controller assembly. Once firmly in place, push and hand tighten the thumb-
screws in a clockwise direction.