Tally Genicom mL450 user manual Job Timeout, Jam Recovery, Hex Print, Toner Out

4-20

TallyGenicom mL450 Laser Printer User Manual

System Menu

Submenus	Default Setting	Available Settings	Procedure for Changing Setting
Wait Timeout	20	0 - 99999	1. Press NEXT or PREVIOUS to
This submenu allows you to				increase or decrease each digit of
increase or decrease the length of				the five-digit number.
time (in seconds) that the printer			2.	Press SELECT set one digit and
will remain in the waiting state—a				move to the next digit.
job is being processed, no			3.	Press SELECT after changing the
end-of-file has been detected, and				last digit to save this setting.
there is no more data to process.
This setting applies to both PCL
and PostScript print jobs. A O
setting indicates immediate
timeout.
Job Timeout	0	0 - 99999	1. Press NEXT or PREVIOUS to
This submenu allows you to				increase or decrease each digit of
increase or decrease the time limit				the five-digit number.
(in seconds) for PostScript jobs. A			2.	Press SELECT set one digit and
0 setting indicates no timeout. This				move to the next digit.
setting applies only to PostScript			3.	Press SELECT after changing the
jobs.				last digit to save this setting.
Jam Recovery	On	On	1. Press NEXT or PREVIOUS to toggle
This submenu allows you to turn		Off		between ON and OFF.
jam recovery on or off.			2.	Press SELECT to save this setting.
Hex Print	Off	On	1. Press NEXT or PREVIOUS to toggle
This submenu allows you to print		Off		between ON and OFF.
hexadecimal characters.			2.	Press SELECT to save this setting.
Toner Out	Stop	Stop	1. Press NEXT or PREVIOUS to toggle
This submenu allows you to specify		Continue		between STOP and CONTINUE.
whether the printer should stop or			2.	Press SELECT to save this setting.
continue when out of toner.

Publication No. GEG-99197 May 04