TallyGenicom mL450 Laser Printer User Manual
Pushbuttons
PS Menu
The PS Menu provides access to the PostScript settings. Use the following procedure to enter the PS Menu:
1.Press the MENU button on the control panel.
2.Press the NEXT button until the text “PS Menu” is shown on the second line of the dis- play.
3.Press the SELECT button to enter the PS menu.
4.Press the NEXT button to move through the submenus: Print PS Errors, and Manual
Feed TO.
5.Press the SELECT button to enter a submenu.
6.Use the procedures in the following table to access and change the PostScript settings:
Submenus | Default | Available Settings | Procedure for Changing Settings | |
| Setting |
|
|
|
|
|
|
|
|
Print PS Errors | Off | On | 1. | Press NEXT or PREVIOUS to toggle between ON |
This submenu allows you |
| Off |
| (print) and OFF (do not print). |
to choose to either print |
|
| 2. | Press SELECT to save this setting. |
or not print PS errors. |
|
|
|
|
|
|
|
|
|
Manual Feed TO | 0 | 0 - 99999 | 1. | Press NEXT or PREVIOUS to increase or |
This submenu allows you |
|
|
| decrease each digit of the |
to set the manual feed |
|
| 2. | Press SELECT to move to the next number. |
|
| 3. | Press SELECT after setting the last digit to save | |
seconds the printer |
|
|
| the setting. |
should wait for a manual |
|
|
|
|
feed. A setting of 0 will |
|
|
|
|
cause printer to wait |
|
|
|
|
indefinitely for a manual |
|
|
|
|
feed. |
|
|
|
|
|
|
|
|
|
May 04 | Publication No. |
