TallyGenicom mL450 Laser Printer User Manual
Disabling the Serial Interface
XON Error
AVAILABLE SELECTIONS | Off |
| On |
|
|
DEFAULT | Off |
|
|
DTR Polarity
AVAILABLE SELECTIONS | High |
| Low |
|
|
DEFAULT | High |
|
|
RTS Polarity
AVAILABLE SELECTIONS | High |
| Low |
|
|
DEFAULT | High |
|
|
Robust XON
AVAILABLE SELECTIONS | Off |
| On |
|
|
DEFAULT | Off |
|
|
Disabling the Serial Interface
The following selection becomes available within the PORT submenu of the INTERFACE menu when the
Serial
The Serial option enables you to turn off the serial port on the interface. This selections is often used to permit uninterrupted communication to other ports such as the parallel or other network ports.
AVAILABLE SELECTIONS | On |
| Off |
|
|
DEFAULT | On |
|
|
References for OpenVMS users
You can print to your laser printer via the serial interface option from an OpenVMS system, either directly connected to the system or through a network device such as a terminal server.
It is recommended that DECprint Supervisor (DCPS) be used for printing. Please see the “Setting Up Printers” chapter of the DCPS System Manager's manual for information on creating a DCPS print queue.
If DCPS will not be used, please see the “Setting Up and Maintaining Queues” chapter of the OpenVMS System Manager's manual for information on setting up print queues using the Open- VMS print symbiont.
May 04 | Publication No. |
