Assembly
The DR® POWERWAGON™ is shipped almost completely assembled. Please read the following instructions before removing the machine from the crate and completing the assembly.
Parts Bag Contents:
(1)5/16" x
(1)5/16" Lock Nut for the Handlebar
(1)Cable Tie for the Cable Assembly
Install the Upper Handlebars
Tools Needed:
(2) 1/2" or adjustable wrenches
1.Position the cable assembly on the right side of the frame (when standing in the operating position). Secure the cable assembly to the frame with the cable tie provided (Figure 1).
WARNING!
The DR® POWERWAGON™ is shipped without gas and oil. DO NOT attempt to start your DR® POWERWAGON™ until assembly is complete, and you've added the correct amounts of gas and oil.
Figure 1
2.Position the upper handlebar inside the lower handlebar, mount the 5/16" x
Figure 2
DR® POWERWAGON™ Safety & Operating Instructions | 1 |