Connect the Battery Wires
Fill the Machine with Oil and
Gas
1.Put the recommended amount of SAE30 detergent oil into the oil reservoir (Figure 4). Fill the oil to the level indicated on the dipstick.
Note: There may be some oil in the reservoir from factory testing. Check the dipstick frequently as you fill to avoid overfilling.
Please refer to your engine manufacturer's owner's manual for more detailed oil information.
2.Fill the gas tank (Figure 4) with fresh unleaded gas to within 1/4" of the top to
allow for fuel expansion. Please refer to
your engine manufacturer's owner's manual for more specific fuel recommendations.
Check the Tire Pressure
Recommended tire pressures are listed below.
Tire Pressure
Standard Tires
Caster Wheel 50 lbs. psi
Please Note: The heavier the load the higher the tire pressure should be. However, do not exceed the maximum recommended load or pressure.
Figure 5
2 | DR® POWERWAGON™ Safety & Operating Instructions |