Panasonic AJ9 (J9) manual AJ9VDEJ9, Features, Precautions When Using Cadmium-Free Contact Type

AJ9VDE(J9)

POWER ROCKER SWITCH

AJ9 (J9)

SWITCHES

AJ9 switch snap-in mounting type	FEATURES
	1. Power rocker switches for safety
	requirements.
	• All versions comply with ClassII
	EN61058-1 insulation grade.
	Insulation distance: 8mm Min.
	Contact gap: 3mm Min.
	• International Standard-approved
	status
			Already approved
AJ9 switch screw mounting type	AJ9 switch		UL, CSA, VDE, SEMKO
	2. High inrush current resistance is
	ideal for office automation equipment.
	Type	Inrush	Contact rating	Expected
				life
	AJ9	100A	16A 250V AC	Min.104

3. Eight standard actuator colors

White, black, red, dark gray, light gray, blue, green, yellow

PRECAUTIONS WHEN USING CADMIUM-FREE CONTACT TYPE

Models with cadmium-free contacts have been introduced in order to reduce environmentally harmful substances. (“F” is affixed to the end of the part number.) We ask customers who are currently using products with cadmium-containing contacts (no “F” at the end of the part number) to please make the switch to models with cadmium-free contacts. When switching, operating life may differ depending on the load. Please be sure to verify this by conducting an evaluation using actual equipment.

RoHS Directive compatibility information

http://www.nais-e.com/

CONSTRUCTION

Actuator

Contact gap (more than 3mm)

The EN60950 (intended for office automation equipment) conforms with a 3mm gap.

When directly opening or closing the primary power supply side, a contact gap of at least 3mm is required in order to ensure safety.

Case

Snap-in Clip

Dustproof construction

All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.