Panasonic AJ9 (J9) manual Specifications, Dimensions, Contact rating, Characteristics

AJ9 (J9)

SPECIFICATIONS

1. Contact rating

Type	Voltage	Resistive load	Motor load
			(EN61058-1)
		(cos φ ] 1.0)
			(cos φ ] 0.6)
AJ9 switch	250V AC	16A	4A

Remark: The motor load is in accordance with EN61058-1. Inrush current can be switched up to the value of 6 times the indicated rating.

2. Characteristics

Expected life	Mechanical	Min. 5 ⋅ 104 (at 20 cpm.)
(Min. operations)	Electrical	Min. 104 (at 10 cpm., at rated load)
Initial insulation resistance (Between terminals)		Min. 100 MΩ (at 500V DC measured by insulation resistive meter)
Initial breakdown voltage (Between terminals)		2,000 Vrms detection current: 10 mA
Initial contact resistance (By voltage drop at 1A, 2 to 4V DC)		Max. 20mΩ
Temperature rise	at 6 ⋅ 103 ope. or less	Max. 30°C (UL1054)
	from 6 ⋅ 103 ope. to 104	Max. 55°C (EN61058-1)
Vibration resistance		10 to 55 Hz at double amplitude of 1.5mm
Shock resistance		Min. 294m/s2{30 G}
Actuator strength		40 N {4.08kgf} for 1 minute (operating direction)
Tensile terminal strength		100 N {10.2kgf} for 1 minute or more (Pull & push direction)
Ambient temperature		–25°C to +85°C (Not freezing below 0°C)
Flame retardancy		UL94V-0
Tracking resistance		Min. 175
Operating force	1-pole	3.92 ± 1.96N {400 ±200gf}
(reference characteristics)	2-pole	5.88 ± 24.5N {600 ±250gf}
Contact material		AgZnO alloy

Remark: Test conditions are in accordance with EN61058-1, UL1054 and JIS C 6571.

DIMENSIONS

1).250 Quick-connect terminal

1. Snap-in mounting type

37

	°
4
°±
28
		2	7
O N		O N
			27

37

	.	4.4	9.7
		6.35
	dia
.75		11
1		34

	mm General tolerance: ±0.5
	Diagram of recommended locations
	for panel mounting holes
		X
2-pole	1-pole	12.6+00.1
15	R0.5 Max.
10
	Panel thickness	X

0.75 to 1.25	34.2−+00.1
1.25 to 2	34.4−+00.1

0.8

1.2

7

12.5

Remark: For soldering compatible with .250 Quick-connect terminal and PC board terminal, only terminal shape is changed.

All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.