Controls and their functions
;4:3 MARKER switch
This is the 4:3 marker ON/OFF switch. When the 4:3 marker is ON, the brightness modulation can be set to ON or OFF.
<4:3 brightness modulation level control
This is used to vary the brightness modulation level outside the 4:3 marker.
=ND filter selector switch [ND]
This is used to select the ND filter position. It is effective when the LOCAL switch is held down.
>ND filter indicators [1 to 5]
These indicate the positions of the ND filter.
?LOCAL switch [LOCAL]
This is used to enable the ND or CC filter to be selected at the camera.
@CC filter selector switch [ND]
This is used to select the CC filter position. It is effective when the LOCAL switch is held down.
ACC filter indicators [A to E]
These indicate the positions of the CC filter.
BMenu ON/OFF switch
This is used to set the menu to ON or OFF and display the status.
CMenu JOG switch
This is used to change the menu page and select the data. For details, refer to the operating instructions of the
DRET A switch [RET A]
This is used to select the RET A switch. When it is lighted, the video signals of RET A selected by the camera are output to the viewfinder.
ERET B switch [RET B]
This is used to select the RET B switch. When it is lighted, the video signals of RET B selected by the camera are output to the viewfinder.
FUser switch [USER SEL]
This enables control to be exercised over the ON/OFF status of the items selected on the camera’s menus.
GVF DETAIL switch [VF DETAIL]
This is used to vary the amount of detail to be provided for the viewfinder’s video output.
HMONITOR output selector switch [MONI SEL]
This is used to select the viewfinder’s video output from the Y/C, R, G or B camera video signals.
ILENS EXT display [EXT]
This lights when the lens extender of the large lens is ON.
JP in P function ON/OFF switch
This is used to set the
KP in P position selector switch
This is used to select the
LLens shrinker display [x0.8]
This lights when the shrinker of the large lens is ON.
7
