![](/images/new-backgrounds/1300727/30072751x1.webp)
2. Basic operations
2-7. Preset memory
Up to 10 panel settings can be stored in this memory.
The table below lists the settings which are stored.
<Table of stored preset memory>
Item | Description of setting | Initial value (factory default) |
Crosspoint | A bus | 1 |
| B bus | 1 |
| 1 | |
| 1 | |
| AUX bus | 1 |
| Color background | WHITE |
Wipe | Wipe pattern | 4 (center) |
| Border width | 0 |
| Soft effect width | 0 |
| Border color | WHT |
Transition area | BKGD/KEY selection | BKGD |
| MIX/WIPE selection | MIX |
| Auto transition time (BKGD) | 30F |
| Auto transition time (KEY) | 30F |
Key | Key type (TYPE) | LIN |
| Key adjustment (ADJ) | GAIN: 100 |
|
| CLIP: 0 |
|
| DENS: 100 |
| Invert ON/OFF | OFF |
| Fill color | BLE |
| Edge color | YLW |
| Edge ON/OFF (TYPE) | OFF |
| Edge width | 2 |
User color | User color 1 (HUE, SAT, LUM) | 0, 0, 100 |
| User color 2 (HUE, SAT, LUM) | 355, 100, 7 |
| User color 3 (HUE, SAT, LUM) | 50, 100, 29 |
| User color 4 (HUE, SAT, LUM) | 0, 0, 0 |
The data stored in the preset memory will not be initialized even when initializing is performed.
STORE: This is used to store the panel settings in the preset memory.
1Press the [FUNC] switch to light its indicator, and then press the [MEM] switch to display the MEM menu. The PSMEM (1/3) menu appears first.
2Turn [F2], select “STOR” using the MODE item, turn [F3], and set the preset memory number using the NO. item.
3Press the [F4] switch (EXEC) to store the settings.
14.&. |
| .0%& |
|
| /0 |
|
|
| ||
|
|
| ||||||||
| 4503 |
|
|
|
| &9&$ | ||||
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| 3&$- |
|
| |
|
|
| |||
|
|
|
|
|
|
|
|
|
|
An asterisk () appears at the left of the number when data has been saved in the preset memory.
26