3. Setup
Setting the gateway
1On the SETUP menu, turn [F1] to display the GW (Gateway) menu.
2Turn [F2] to select the setting location. An asterisk (
) appears at the setting location.
3Turn [F3] to set the number, and press the [F3] switch to enter the setting. If the setting is not entered even though it has been changed, “ ! ” appears above the setting location, and when the setting location is moved by turning [F2], the value prior to the change is restored.
(8
Setting the MAC address
1On the SETUP menu, turn [F1] to display the MAC menu. The MAC address now appears.
(When the MAC address is “008045448000”.)
."$
39
