Panasonic AW-DU600P manual Contents, Introduction, Accessories

Contents

Introduction	3	Menu settings	17
Accessories	3	Attaching the rack mounting adapters	19
Parts and their functions	4	Changing the position of the rear panel	19
Control panel	4	Attaching the joint angle adapter	20
Rear panel	5	Specifications	21
Connections	6

Introduction

O This adapter enables remote control of a pan-tilt head system using a telephone line.

It is also possible to control a pan-tilt head system directly, without the use of a telephone line, using the direct mode.

When control is to be performed via a telephone line, one of these units (AW-DU600) is required for the system at both the transmitting and receiving ends.

O When an AW-RP505, AW-RP605 or PC is used as the controller, it is possible to control a pan-tilt head system consisting of up to 5 pan-tilt heads. It is possible to select any one of the pan-tilt heads connected to the system using the camera switch signals.)

O Control panels which can be used in the transmitting system

AW-RP301, AW-RP501, AW-RP505 and AW-RP605

O Control panels which can be used in the receiving system AW-PH300A, AW-PH350, AW-PH500 and AW-PH600

O This adapter can extend only control signals of the camera and pan-tilt head via a phone line. It is not possible to transmit video signals.

O Use the same modem at both the transmitting and receiving ends.

Direct mode

Transmitting system

Controller
	Pan-tilt head
	system
AW-DU600	1
	2
	3
	4
	5

Controller

AW-DU600 Modem

Telephone line

Modem

Receiving system

AW-DU600

Pan-tilt head system

1

2

3

4

5

Accessories

Rack mounting adapters . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Joint angle adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Mounting screws (M4) . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

3