Connections
Making a call
Make a call from the
1.Turn on the power to all units.
2.Use the number keys on this adapter to enter the desired number.
The telephone number entered appears on the top section of the LCD panel.
0 | 1 2 3 4 5 6 7 8 9 |
|
| |
!Telephone number entered | ||||
1 : | P r e s s S t a r t |
| ||
|
|
|
|
|
If the wrong number is entered by mistake, press the DELETE key ( # i 0 ) to delete 1 digit at a time, starting from the number entered last. Press the CLEAR key ( # i START ) to delete the whole number at once.
3.After entering the telephone number, press the START key.
When the connection is initiated, “Calling” appears on the LCD panel.
When the connection is established, “Connect” appears on the LCD panel and control of the
<Note>
The message appearing on the LCD panel may differ, depending on the modem used.
4.Control the pan-tilt head system from the control panel.
When an
<Note>
OWhen an
OIf the OPERATE switch on the
5.After control of the
“Hang Up” appears on the LCD display and the telephone line is cut.
Once the line is cut, “Press Start” appears on the LCD panel.
When ON has been selected for the
<Note>
If the POWER switch or OPERATE switch on the control panel is set to OFF before the telephone line is cut, the power to the
<Note>
While the telephone line is being connected, none of the operating keys on the adapters will function except for the STOP key on the transmitting side.
12
