Panasonic AW-DU600P manual Transmitting system connection procedure, Menu j Function R e c t

Connections

Transmitting system connection procedure

1.Connect the AW-PS301 AC adapter to the DC 12V IN connector on this adapter.

2.Set the control panel selector switch on this adapter. Set it to A when using an AW-RP605.

Set it to B when using an AW-RP301, 501, 505, or WV- CB700A.

3.Connect the PAN/TILT CONTROL OUT connector on the control panel to the PAN/TILT CONTROL IN connector on this adapter using a 10 BASE-T (equivalent to UTP category 5) straight cable.]

With the AW-RP605, use the EXTERNAL CONTROL OUT connector.

The connection distance can be extended up to 500 meters.

4.Connect the CAMERA CONTROL OUT connector on the control panel to the CAMERA CONTROL IN connector on this adapter using a coaxial cable (equivalent to 5C-2V).

This connection is not possible with AW-RP301 and AW-RP605 control panels as they are not equipped with a CAMERA CONTROL OUT connector.

The connection distance can be extended up to 500 meters.

5.Connect the TO MODEM connector to the RS-232C connector on the modem using the RS-232C cable provided with the modem.

6.Connect the telephone line to the line input jack on the modem.

7.Set the power switch on the AW-DU600 to ON.

8.Dial Up Adapter settings

1 Set this adapter to transmit mode.

Press the MENU+ key ( 2 i START ) to open the menu settings.

When “Menu-1 Function” appears on the LCD panel,

use the !				# keys and select
		START	STOP
Tx (transmit mode).
	Menuj 1		Function
	T x	R x	D i r e c t

2Select the telephone line.

Press the MENU+ key ( 2 i START ) to change the menu setting item.

When “Menu-2 Modulate” appears on the LCD panel,

use the !			# keys and select
	START	STOP

Tone or Pulse according to the telephone line to be used.

3Set this adapter to switch to an external line via a PBX (private branch exchange).

Press the MENU+ key ( 2 i START ) to change

the menu setting item.

When “Menu-3 PBX” appears on the LCD panel, use

the !				# keys and set the
		START	STOP
external line selector number to 0 or 9.
Select “None” if a PBX is not to be used.
	Menuj 3			PBX
	N o n e 0 a n d 9 a n d

4Set whether or not to turn the power of the pan-tilt head system off when the telephone line is cut. Press the MENU+ key ( 2 i START ) to change the menu setting item.

“Menu-7 Pw-Off” appears on the LCD panel.

Select “Yes” if the power of the camera/pan-tilt head is to be turned off when the telephone line is cut. Select “No” if the power of the camera/pan-tilt head is not to be turned off when the telephone line is cut.

	Menuj 7		Pw-Off
		Y e s	N o
When the settings are completed, press the
					MENU+
key ( 2 i			) once again to exit	the menu
		START
settings.

9.Set the power switch on the modem to ON. “Press Start” appears on the LCD panel.

1 : P r e s s S t a r t

If the modem is not connected correctly, [---] will appear on the LCD panel.

1 : j j j

<Note>

Set the AW-RP605 setting menu (EXT CONTROL OUT) to ON.

Menuj 2	Modulate
T o n e	P u l s e

7