-35-
5. Auto Gain Up Control Setting
[Auto Gain Up: OFF, ON]
This cannot be set when Auto has been set for the
CCD storage time setting (1-9).
OFF: The light quantity is not adjusted
automatically.
ON: The light quantity is adjusted automatically.
The maximum to which the gain can be
increased using the auto gain up function is
selected by the AGC maximum gain setting (1-6).
6. AGC Maximum Gain
[AGC Max Gain: 6dB, 12dB, 18dB, 24dB, N/Eye L,
N/Eye H] (AW-E750, AW-E655, AW-E650)
[AGC Max Gain: 6dB, 12dB, 18dB, 24dB, N/Eye]
(AW-E350)
This is used to set the maximum amount to which the
gain can be increased when ON has been selected
as the auto gain up setting (1-5).
7. Manual Gain Up Control Setting
[Manual Gain Up: 0 dB to 30 dB, N/Eye L, N/Eye H]
(AW-E750, AW-E655, AW-E650)
[Manual Gain Up: 0 dB to 30 dB, N/Eye] (AW-E350)
Manual setting is possible only when the Auto Gain
Up control (1-5) is in the OFF position.
0 dB: 0 dB should be selected in normal cases.
1 dB to 30 dB: Use this range if sufficient video out-
put cannot be obtained even when the lens iris is
opened in shooting dark scenes.
AW-E750, AW-E655, AW-E650
Night Eye L: Use this setting if it is not possible to
achieve a satisfactory video output even at 30 dB.
Night Eye H: Use this setting if it is not possible to
achieve a satisfactory video output even at the
Night Eye L setting.
AW-E350
Night Eye: Use this setting if it is not possible to
achieve a satisfactory video output even at 30 dB.
In case of settings on the camera alone or when
the iris switch on the RCU (RCB) is at [AUTO], the
Auto Gain Up control may not operate if the lens
iris switch is in the manual position.
When the AGC switch on the hybrid control panel
is set to AGC, the Auto Gain Up control operates
in the HIGH position.
Notes
Hybrid Control Panel
AGC Switch