9. CCD Storage Time Setting
[Charge Time: Auto, OFF, 1/30s, 1/15s, 1/8s, 1/4s,
1/2s, 1s, 2s]
This is used to set the CCD storage time.
Auto: ALC is performed followed by AGC and then
by the data storage, and the camera automatical-
ly adjusts the light quantity.
If ON is selected as the auto ND (ELC) setting
(1-4), ELC is performed followed by ALC, AGC
and then by the data storage in this order, and
the light quantity is automatically adjusted.
The electronic shutter setting (5-2) cannot be
changed.
OFF: Under normal circumstances, this setting is
used.
1/30s to 2s: Use this setting if it is not possible to
achieve a satisfactory video output even when
the gain up setting is used.
The auto ND (ELC) setting (1-4) and electronic
shutter setting (5-2) go OFF and cannot be
changed.
If the images (CCD read out (mode) setting
(5-4)) have been set to Fine, 1/15s to 2s is
selected as the storage time setting, and the
sensitivity is set to about one-half of that
obtained with when they have been set to
Normal.
-36-
Only 0 dB, 9 dB, or 18 dB can be selected in
case of using the RCU (RCB).
0 dB when the manual GAIN switch on the hybrid
costti panely is t LOWB, 9 dB when it is t MIDB, o