-6-
Turn power off before connecting or disconnecting
cables.
Connection or disconnection of any studio cable,
RCB cable or other cable to any unit of equipment
must be performed while power is off.
While the camera is in automatic mode;
Shooting of bright objects in ELC operation mode
may result in a smeared picture unique to the CCD.
The ATW function under fluorescent illumination can
adversely change the white balance.
SPECIAL NOTES ON OPERATION
There is a cooling fan inside.
Do not cover the port or otherwise block ventilation
during operation. Internal heat buildup can cause a
fire.
It is an expendable part, and must be replaced
about every 30 000 hours. (Whenever fan replace-
ment is necessary, be sure to ask the store where
you purchased the set.) (AW-E750, AW-E655)