;Other Set Display
oGamma Level Setting [Gamma: 0.35 to 0.55] Gamma correction level can be set.
pKnee Level Setting
[Knee Point: 88% to 98%, Dynamic]
88% to 98%: The level of video signals subject to knee (knee point) can be set.
Dynamic: Knee level is automatically adjusted according to the scene.
qWhite Clip Level Setting [White Clip: 95% to 110%] The peak level of video signals to be
rFlare Correction Level Setting [Flare R/G/B: 0 to 100] Flare correction level can be adjusted.
sBlack Stretch Setting [Black Stretch: ON, OFF]
Black stretch to correct the suppression of black portions at low luminance can be set to ON or OFF.
tClean DNR Setting [Clean DNR: OFF, Low, High] This enables the clean DNR effect to be selected.
uCCD Read Out Mode Setting [Field/Frame: Field, Frame 1, Frame 2] Field: CCD storage will be by field storage.
Frame 1: Vertical resolution increases in frame storage.
Frame 2: Vertical resolution is raised without increasing |
|
residual images by frame storage and |
|
electronic shutter. |
vPC Control Access Speed Setting [Baud Rate: 1200bps, 2400bps, 4800bps, 9600bps]
This setting is to select a communication speed in controlling the camera from the computer.
wComponent Output Setting [Component: RGB, Y/Pr/Pb, Y/C]
This enables RGB, Y/Pr/Pb or Y/C to be selected as the component signals which are to be output from the I/F REMOTE connector.
xAspect Ratio Selection [Aspect Ratio: 16:9, 4:3] Aspect ratio can be selected from 16:9 or 4:3.
yFan Setting [Fan SW: OFF, Auto]
OFF: Select this setting to stop the fan when its operating sound is found to be bothersome in a studio or other such environment.
Auto: The temperature is detected automatically, and the fan starts operating when the temperature exceeds approx. 95°F (35°C).
Under normal circumstances, the “Auto” setting is used.
zLanguage Selection [Language: English, Japanese]
English: Menu screen is displayed in English.
Japanese: Menu screen is displayed in Japanese.