Setting and changing the optional cards
<Optional Card Setting Sub Menu
This sub menu appears when a studio card
1 
2
3 
4
3.Safety Zone Setting [Safety Zone: OFF, 1, 2, 3, 4, 5] This is used to select the type of safety zone which is displayed on the viewfinder. A safety zone is not displayed when “OFF” is selected.
❈The safety zone and center marker indicate electrical positions and, as such, they may be at variance with their optical positions.
1 | 2 |
|
|
|
|
| 3 | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
45
1.Zebra Indicator Setting [Zebra: OFF, ON]
This is used to select whether to display the zebra pattern on the viewfinder.
OFF: The zebra pattern is not displayed on the viewfinder.
ON: The zebra pattern is displayed on the viewfinder.
2.Zebra Level Setting [Level: 70% to 110%]
This enables the zebra pattern to be displayed so that it will provide as a general guideline for the luminance level.
❈It can be set when “ON” has been selected as the zebra indicator setting.
The inside and outside frames denote safety zones of about 90% and about 95%, respectively.
4.EVF Output Setting [EVF Output: Y, CVBS] This is used to set the signals to be output to the viewfinder.
Y:The luminance signal is output to the viewfinder. CVBS: The color signals are output to the viewfinder. ❈ When “CVBS” has been selected as the setting, the
zebra pattern will not be displayed on the viewfinder.
