Panasonic AW-E860N manual $ Gen-lock adjustment, Horizontal phase control

Models: AW-E860N

1 32
Download 32 pages 39.51 Kb
Page 3
Image 3

$ Gen-lock adjustment

Phase adjustments must be performed with the camera or the RCU (RCB) when external synchronizing signals are supplied to the system in cases where multiple cameras are used or peripheral devices are connected.

U Horizontal phase control

Observe the waveform of the external synchronizing input signal (black burst signal) and video output signal on a two-channel oscilloscope. Then match the horizontal phase of both signals by adjusting them with the cameras or RCU’s horizontal phase control.

External gen-lock input signal (black burst output of special effect generator)

Video signal

Adjust the horizontal phase

[ADJUSTMENT by CAMERA]

NO/BAR switch

YES/ABC switch

[ADJUSTMENT with RCU (RCB, Hybrid control panel )]

Use the horizontal phase control.

1.Press the NO/BAR switch for over 5 seconds to display the color bar.

2.Select [G/L Adjustment] on the main menu, then select [H Phase] on the submenu.

3.Adjust the horizontal phase with the YES/ABC and NO/BAR switch.

Horizontal phase control

Subcarrier phase fine control

Subcarrier phase coarse control

-27-

Page 3
Image 3
Panasonic AW-E860N manual $ Gen-lock adjustment, Horizontal phase control