Panasonic AW-E860N manual $ Setting, $ Changing the Language setting, From the camera alone

Menu item setting

❈If the output signal from camera is color bar, only “G/L, Color Bar Set” screen is displayed.

$ Setting

1.From the camera alone:

Keep the MENU switch depressed for 5 seconds or more.

From RCU (RCB):

Set the user set switch in the pocket to the ON position. The main menu appears on the monitor screen.

2.Each time the MENU switch (A), ITEM/AWC switch (S), or NO/BAR switch (–) is pressed, the blinking item moves up or down.

3.When the YES/ABC switch is pressed after selecting the desired item to blink, the submenu for the selected item appears on the screen.

4.Select the desired item to be changed in its settings using the MENU switch (A) and ITEM/AWC switch (S).

5.Press the YES/ABC switch (+) or NO/BAR switch (–) to

change the settings. -32-

6.Select [Return] using the MENU switch and ITEM/AWC switch, then press the YES/ABC switch to return to the main menu.

7.After changing the settings, take the following steps.

Camera alone:

Select [End] using the MENU switch and ITEM/AWC switch and press the YES/ABC switch.

RCU (RCB):

Set the user set switch in the pocket to the OFF position. The camera will now operate according to the new settings.

CAMERA RCU (RCB)

USER SET switch

MENU

ITEM/AWC

YES/ABC

NO/BAR

$ Changing the Language setting

The language on the menu screen can be changed from English to Japanese. (Factory setting: English)

•Halogen, Fluorescent, Outdoor Mode

Select “Japanese” in the “Language” setting in Other Set submenu.

•Use Mode

Select “Japanese” in the “Language” setting in Other Set2 submenu.