Operating Instructions
[For assistance, please call: 1-800-272-7033] 25
Notes
• If the image is not displayed properly, try the following 2 URLs.
• Only an administrator can control privacy mode.
• In privacy mode, sensor and timer image buffer/transfer features also are
stopped.
• When executing [Privacy Mode] while setting [Allowing unregistered users] on
the Security: Administrator page (see page 41), an authentication window is
displayed. Log in to the camera as an administrator.
• If the users are restricted to level 1 or 2 on the General User page (see page
45), the users do not see some kinds of buttons.
• When pan/tilt reaches the end, the keypad number and character disappear.
E.g.: The pan reaches the left end.
• Some mobile phones are not compatible with Panasonic Network Cameras.
Some phones may allow viewing only on port 80, and some may not support
password authentication. See the Panasonic Network Camera support
website at http://panasonic.co.jp/pcc/products/en/netwkcam/ for a mobile
phone model list, and the compatibility level which has been verified with the
Panasonic Network Camera.
• Some mobile phones display images not at the specified resolution but at a
decreased size.
Stopping E-mail Transfer by the Mobile Phone Operation
Executing privacy mode on a mobile phone operation can stop E-mail transfer.
1. Access the camera from a mobile phone (see page 24) and log in to the
camera as an administrator.
2. Execute [Privacy Mode] (see page 24).
• The camera switches to privacy mode and stops E-mail transfer (Image
Buffer/Transfer).
1. http:// IP address(or URL):Port Number/mobileh for HTML.
(or XXXXX.viewnetcam.com:50000/mobileh)
2. http:// IP address(or URL):Port Number/mobilex for XHTML.
(or XXXXX.viewnetcam.com:50000/mobilex)
"(4)L" disappears.