Operating Instructions
[For assistance, please call: 1-800-272-7033] 31
Default Gateway*1
(Static/DHCP Only)
If you have the assigned Default Gateway address by your
ISP or network administrator, enter it in this data field.
Set 4 digits (0—255) and 3 periods such as
"192.168.0.253". But "0.0.0.0" and "255.255.255.255" are
not available.
DNS Server
Address*1
(Static/DHCP Only)
DNS server address is required in the following conditions.
Transferring camera images by E-mail or FTP
Setting cameras by their host names on the Multi-
Camera Setup page
Using the Viewnetcam.com service
If you have the assigned DNS server addresses by your
ISP or network administrator, enter them in this data field.
They usually have two addresses.
Set 4 digits (0—255) and 3 periods such as
"192.168.0.253". But "0.0.0.0" and "255.255.255.255" are
not available.
Max. Bandwidth
Usage
The bandwidth can be restricted.
Select the maximum bandwidth usage from [Unlimited] to
[0.1 Mbps].
Note
Set the maximum bandwidth usage seeing the following
file sizes. These are examples for a JPEG file with a
standard image quality. File sizes may change depending
on the image quality or how bright the object is.
160 x 120 pixels: About 3 KB (24 Kbit)
320 x 240 pixels: About 10 KB (80 Kbit)
640 x 480 pixels: About 18 KB (144 Kbit)
Connection Type Select [Auto Negotiation] normally. If you cannot access
the camera, see page 19 "The Top page is not displayed."
in the Installation/Troubleshooting.
*1 If you automatically obtain the IP address from the DHCP server, you do not need to set it.
Setting Description