Operating Instructions
[For assistance, please call: 1-800-272-7033] 29
4. Click [Save] when finished.
New settings are saved.
When finished, the following page is displayed.
Note
The current network settings are shown on the Status page in the Maintenance
section (see page 72).
5. Click [Restart].
The camera restarts, and the Top page is displayed.
Note
When you do not know the camera IP address while setting [Automatic Setup]
or [DHCP Setup], you can search the camera IP address by using the Setup
Program (see page 90).
DHCP Setup Static Setup
Clicking [Cancel] takes you back to the previous page without
saving changes.