Operating Instructions
50
Notes
• Set the private IP address and port number for the camera on the same
LAN.
• If you access the camera from the Internet, set the host name (or the
global IP address) and port number.
4. Click [Save] when finished.
• New settings are saved.
• The Multi-Camera Setup page is displayed.
Setting Description
Display • Check the box to enable the camera.
IP Address*1 or
Host Name*2
• Set the IP address or the host name to enable the camera.
Port No. • Set the port number (1—65535).
Camera Name*3 • This camera name is displayed only on the Multi-Camera
page.
*1 Set 4 digits (0—255) and 3 periods such as "192.168.0.253". But "0.0.0.0" and
"255.255.255.255" are not available.
*2 Enter ASCII characters for the host name (see page 96). But [Space], ["], ['],
[#], [&], [%], [=], [+], [?], [<] and [>] are not available.
Enter 1—255 characters.
*3 Enter ASCII characters (see page 96) or characters in each language (1—15
characters for a 1-byte character and 1—7 characters for a 2-byte character).
But [Space], ["], ['], [#], [&], [%], [=], [+], [?], [<], and [>] are not available.