SAFETY PRECAUTIONS
In order to prevent any fatal accidents caused by misoperation or mishandling the monitor, be fully aware of all the following precautions.
WARNINGS
To prevent fire or shock hazard, do not expose this monitor to rain or moisture. Dangerous high voltages are present inside the unit. Do not remove the back cover of the cabinet. When servicing the monitor, consult qualified service personnel. Never try to service it yourself.
WARNING : THIS APPARATUS MUST BE EARTHED.
Improper operations, in particular alternation of high voltage or changing the type of tube may result in
PRECAUTIONS
●Use only the power source specified on the unit.
(230 V AC, 50 Hz/60 Hz)
●Keep flammable material, water, and metal objects away from the unit – especially the interior of the unit.
●This unit incorporates high voltage circuitry.
For your own safety and that of your equipment, do not attempt to modify or disassemble this monitor.
There are no
●Video or audio signals cannot be input to this monitor without optional input cards.
●In these instructions, all explanations (except where noted) refer to the
HANDLING
●Avoid shocks or vibrations. These may damage the unit and cause it to malfunction.
●Do not block the ventilation slots.
●Do not expose this unit to high temperatures. Extended exposure to direct sunlight or a heater could deform the cabinet or cause the performance of internal components to deteriorate.
●Do not place the unit near appliances generating strong electric or magnetic fields. They can generate picture noise and instability.
●Keep the monitor clean by wiping the cabinet and CRT screen with a piece of soft cloth. Do not apply thinner or benzine. These chemicals can damage the finish and erase printed letters. When the unit is excessively dirty, use a diluted neutral cleanser, then wipe away the cleanser with a dry cloth.
SCREEN BURN
●It is not recommended to keep a certain still image displayed on screen for a long time as well as displaying extremely bright images on screen. This may cause a burning (sticking) phenomenon on the screen of
DEGAUSS
●Do not use a magnet eraser to degauss the monitor’s cathode ray tube from the outside. Doing so may distort its aperture grill and cause a malfunction.
EMC Supplement
This equipment is in conformity with the provisions and protection requirements of the corresponding European Directives. This equipment is designed for professional video appliances and can be used in the following environments:
●Controlled EMC environment (for example purpose built broadcasting or recording studio), and the rural outdoors environment (far away from railways, transmitters, overhead power lines, etc.)
In order to keep the best performance and furthermore for electromagnetic compatibility we recommend to use cables not exceeding the following length:
Cable |
| Length | Cable |
| Length |
Power cord | (attached cable) | 2.0 m | Audio signal cable | (shielded cable) | 1.0 m |
Video signal cable | (coaxial cable) | 2.0 m | (shielded cable) | 1.5 m | |
Y/C signal cable | (shielded cable) | 3.0 m | (shielded cable) | 1.0 m |
The inrush current of this apparatus is 20.1 ampere.
Caution
When in case that the strong electromagnetic waves or magnetism is near the audio cable or the signal cable, the sound or the picture will contain noise. In such case, please keep the cable away from the sources of the disturbance.
2
