Panasonic BT-H1700AE  VIDEO INPUT CARD OPTIONAL BT-YA701P,  Component/Rgb Input Card Optional

CONTROLS AND FEATURES

(INPUT CARD: OPTIONAL)

VIDEO INPUT CARD (OPTIONAL: BT-YA701P)

VIDEO1

IN		OUT	1
	VIDEO2

IN	OUT
	Y/C IN	2
EXT.SYNC		5
		3

IN OUT

AUDIO1

IN OUT 4

AUDIO2

Compatible signal formats:

NTSC (3.58 MHz), PAL (4.43 MHz), black-and-white (50 Hz/60 Hz)

*You can select “AUTO” (automatic selection), “NTSC” or “PAL” in SETUP MENU when switching NTSC or PAL. Normally select AUTO. However, if the input signal is unstable, select NTSC or PAL.

1 Video input/output terminals

Input (IN) and output (OUT) terminals for video signals. The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.)

Select VIDEO 1 : press INPUT SELECT A/C/E button

Select VIDEO 2 : press INPUT SELECT B/D/F button

2 S-video input terminal

Input terminal for the S-video signal.

When an S-video signal is input to this terminal and a video signal is input to VIDEO 2, the S-video signal has priority over the video signal.

When choosing the S-video input, press INPUT SELECT B/D/F button.

3 Synchronised signal input/output terminals

Input (IN) and output (OUT) terminals for the complex synchronised signals.

Function differs depends on the SYNC SELECT setting in the FUNCTION SETTING setup menu. For details, refer to Page 15.

The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.)

4 Audio input/output terminals

Input (IN) and output (OUT) terminals for audio signals corresponding to VIDEO 1 and VIDEO 2. The IN and OUT terminals are bridge-connected.

5 Connection terminal (to a Multi-Format Monitor)

Attach to the connection terminal of your Multi-Format Monitor.

COMPONENT/RGB INPUT CARD (OPTIONAL:

BT-YA702P) 1 Video input/output terminals

G / Y

INOUT

B/PB/B-Y

INOUT

R/PR/B-Y

INOUT

HD/CS

INOUT

VD

INOUT

AUDIO

IN OUT

1

2

3

4

Input (IN) and output (OUT) terminals for component (colour difference) or RGB signals.

The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.)

Select component signal : press INPUT SELECT A/C/E button

Select RGB signal : press INPUT SELECT B/D/F button

2 Synchronised signal input/output terminals

Input (IN) and output (OUT) terminals for the vertical, horizontal or complex synchronised signals.

Function differs depends on the SYNC SELECT setting in the FUNCTION SETTING setup menu. For details, refer to Page 15.

The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.)

3 Audio input/output terminals

Input (IN) and output (OUT) terminals for audio signals. The IN and OUT terminals are bridge-connected.

Compatible signal formats:

480/60i, 576/50i, 576/50p, 480/60p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/24psF

6

4 Connection terminal (to a Multi-Format Monitor)

Attach to the connection terminal of your Multi-Format Monitor.