Panasonic BT-H1700AE manual HOW TO USE “SETUP MENU” contd, Color Temp./Bal

HOW TO USE “SETUP MENU” (cont'd)

Item	: CONTRAST
Adjustment
range	: –20 ~ 00 ~ +20
Function	: For approximate adjustment of the picture
		contrast. Before adjustment, turn the CON-
		TRAST knob on the front panel to the middle.
Item	: BRIGHT
Adjustment
range	: –20 ~ 00 ~ +20
Function	: For approximate adjustment of the picture

3.COLOR TEMP./BAL.

Sets or adjusts the colour

temperature or white balance. Press the button to display the setting menu illustrated on the right.

<COLOR TEMP./BAL.>

COLOR TEMP.		:LOW
BLUE	DRIVE	: 000
RED DRIVE		: 000
GREEN CUTOFF		: 000
BLUE	CUTOFF	: 000
RED CUTOFF		: 000
sub	menu
reset

EXIT: MENU ADJUST:-+ SELECT:

		brightness. Before adjustment, turn the BRIGHT
		knob on the front panel to the middle.
Item	: CHROMA
Adjustment
range	: –20 ~ 00 ~ +20
Function	: For approximate adjustment of the colour
		density. Before adjustment, turn the CHROMA
		knob on the front panel to the middle.
Item	: PHASE
Adjustment
range	: –20 ~ 00 ~ +20
Function	: For approximate adjustment of the picture hue.
		Before adjustment, turn the PHASE knob on the
		front panel to the middle.
Item	: NTSC SETUP
Settings	: 00/7.5
Function	: Sets the level of the input NTSC signal.
		00 : Compliant with 0% set-up signal.
		75 : Compliant with 7.5% set-up signal.

NOTE : NTSC SETUP is displayed only when the video input

card is installed and an NTSC signal is input.

Item	: COMPO. LEVEL
Settings	: SMPTE/B75/B00
Function	: Sets the level of the input component signal.

SMPTE : Compliant with M2VTR signals.

B75 : Compliant with Betacam 7.5% set-up signal.

B00 : Compliant with Betacam 0% set-up signal.

NOTE : COMPO. LEVEL is displayed only when a 480/60i, 480/60p, 576/50i or 576/50p signal is input.

Item	: sub menu
Adjustment range/
Settings	: Same as CONTRAST, BRIGHT, CHROMA,
		PHASE and COMPO LEVEL/NTSC SETUP.
Function	: Performs CONTRAST, BRIGHT, CHROMA,
		PHASE or COMPO LEVEL/NTSC SETUP
		settings in a single-line display. The sub menu
		display varies depending on the selected item.
Item	: reset
Function	: Sets the CONTRAST, BRIGHT, CHROMA,
		PHASE and COMPO LEVEL/NTSC SETUP
		values to factory-preset ones.

Item	: COLOR TEMP.
Settings	: HIGH/LOW
Function	: Selects the colour temperature.
		HIGH : Sets the colour temperature to D93.
		LOW : Sets the colour temperature to D65.
Item	: BLUE DRIVE
Adjustment
range	: MIN ~ 000 ~ MAX (in 127 grades)
Function	: Adjusts the blue drive level.
Item	: RED DRIVE
Adjustment
range	: MIN ~ 000 ~ MAX (in 127 grades)
Function	: Adjusts the red drive level.
Item	: GREEN CUTOFF
Adjustment
range	: MIN ~ 000 ~ MAX (in 255 grades)
Function	: Sets the green cut-off point.
Item	: BLUE CUTOFF
Adjustment
range	: MIN ~ 000 ~ MAX (in 255 grades)
Function	: Sets the blue cut-off point.
Item	: RED CUTOFF
Adjustment
range	: MIN ~ 000 ~ MAX (in 255 grades)
Function	: Sets the red cut-off point.
Item	: sub menu
Adjustment range/
Settings	: Same as BLUE DRIVE, RED DRIVE, GREEN
		CUTOFF, BLUE CUTOFF and RED CUTOFF.
Function	: Performs BLUE DRIVE, RED DRIVE, GREEN
		CUTOFF, BLUE CUTOFF or RED CUTOFF
		settings in a single-line display. The sub menu
		display varies depending on the selected item.
Item	: reset
Function	: Sets the BLUE DRIVE, RED DRIVE, GREEN
		CUTOFF, BLUE CUTOFF and RED CUTOFF
		values to factory-preset ones.

16