Panasonic BT-L1500E, BT-L1500P, BT-L2150E, BT-L2150P VIDEO CONFIG, GAMMA, RESET, MODE*1, Setting, Setting, Sub menu, SELECT*1, Sub menu, SHARPNESS, COLOR TEMP, GAIN RED*5, BIAS RED*5, Description, SD ASPECT*1

Main Menu (continued)

VIDEO CONFIG

					Underlined values indicate factory defaults.
Sub menu		Setting	Description
GAMMA		2.2	Selects gamma curve.
SELECT*1		2.35	<2.2>	Selects the gamma 2.2 curve.
			<2.35>	Selects the gamma 2.35 curve.
				(A mode that approximates CRT display capability.)
COLOR TEMP.		D93	Selects color temperature.
		D65	<D93>	Equivalent to a color temperature of 9,300 K
		VAR1*3	<D65>	Equivalent to a color temperature of 6,500 K
		VAR2*3	<VAR1>	WB adjustment mode
			<VAR2>	WB adjustment mode
SHARPNESS		HIGH*2	Selects the width of outline correction edge.
MODE*1		LOW	<HIGH>	Thin edge	<LOW> Wide edge
SHARPNESS H*1		0 to 30*2	Sets horizontal outline correction. The item display moves to the
			lower part of the screen during adjustment.
SD ASPECT*1		4:3	Sets the aspect ratio for SD signal input.
		16:9	<4:3> 4:3 aspect ratio		<16:9> 16:9 aspect ratio
*1	This function is not available when PC is selected in the INPUT SELECT menu (Jpage 21).
*2	The following sharpness values are available and the settings for the selected input signal is displayed.

Adjustment status during selection appears at the bottom right of the screen.

1)VIDEO system input (VIDEO) (the factory defaults are SHARPNESS MODE: LOW and SHARPNESS H: 0)

2)HD for input other than VIDEO (the factory defaults are SHARPNESS MODE: HIGH and SHARPNESS H: 0).

3)SD for input other than VIDEO (the factory defaults are SHARPNESS MODE: LOW and SHARPNESS H: 0). *3 Selecting VAR1, VAR2 engages the WB adjustment mode (J see below).

■WB Adjustment Mode

Select VAR1 and VAR2 for COLOR TEMP. in the VIDEO CONFIG menu to make WHITE BALANCE VAR1 and WHITE BALANCE VAR2 (WB) adjustments.

			Underlined values indicate factory defaults.
Sub menu	Setting	Description
COLOR TEMP.*4	D93	Selects the color temperature that will become the basis for
	D65	adjustment.
		<D93>	Equivalent to a color temperature of 9,300 K
		<D65>	Equivalent to a color temperature of 6,500 K
GAIN RED*5	0 - 1023	Adjusts the GAIN elements for RED.
	(Factory defaults are
GAIN GREEN*5		Adjusts the GAIN elements for GREEN.
	color temperature
GAIN BLUE*5		Adjusts the GAIN elements for BLUE.
	<D65> values.)
	• These are the
	adjustments made
	before shipment
	from the factory.
BIAS RED*5	-512 to 511	Adjusts the BIAS elements for RED.
	(Factory default: 0)
BIAS GREEN*5		Adjusts the BIAS elements for GREEN.
BIAS BLUE*5		Adjusts the BIAS elements for BLUE.
RESET		Resets GAIN RED - BIAS BLUE to color temperature values
		selected under COLOR TEMP.

*4 Selecting COLOR TEMP. and pressing [ENTER] after making a change, opens a confirmation screen. Selecting YES and pressing [ENTER] in this screen resets selected GAIN and BIAS values to the selected color temperature values.

*5 The item display moves to the lower part of the screen during adjustment.

20