Panasonic BT-L1500E, BT-L1500P, BT-L2150E, BT-L2150P SYSTEM CONFIG, GPI, INPUT SELECT, Setting, Setting, Setting, Sub menu, Sub menu, Sub menu, BACKLIGHT, CONT./BACK, SETUP LOAD, POWER DOWN, NTSC SETUP

Main Menu (continued)

SYSTEM CONFIG

				Underlined values indicate factory defaults.
Sub menu		Setting	Description
CONT./BACK.		BACKLIGHT	Selects function to be assigned to the CONT./B.LIGHT front panel
		CONTRAST	buttons.
			<BACKLIGHT>	Adjusts the B.LIGHT (backlight).
			<CONTRAST>	Adjusts the CONT. (contrast).
BACKLIGHT		0 to 60	Adjusts LCD backlight brightness. Adjust as required by ambient
			conditions.
STATUS DISPLAY		CONTINUE	Sets display state for input signal status (on-screen menu).
		3SEC OFF	<CONTINUE> Displayed at all times.
		OFF	<3SEC OFF>	Displayed for approximately 3 seconds after a status
				change.
			<OFF >	Not displayed.
SETUP LOAD		FACTORY	Loads saved factory defaults (FACTORY).
COLOR SPACE		SMPTE-C*1	Sets the studio standard color shade.
		EBU*2
		ITU-709*3
POWER DOWN		OFF	Selects whether monitor power shuts off (POWER DOWN) when no
		ON	operation has taken place for a preset period of time and no input signal
			is present.
			<OFF> Disables POWER DOWN.
			<ON> Enables POWER DOWN.
*1	Factory default setting for the BT-L2150P/1500P.
*2	Factory default setting for the BT-L2150E/1500E.
*3	ITU-709 is an ITU-R BT.709 standard.

GPI

Enables and disables all GPI functions enabled by GPI CONTROL.

			Underlined values indicate factory defaults.
Sub menu	Setting	Description
GPI CONTROL	DISABLE	Enables and disables GPI functions
	ENABLE	<DISABLE>	Disabled
		<ENABLE>	Enabled

INPUT SELECT

		Underlined values indicate factory defaults.
Sub menu	Setting	Description
NTSC SETUP	75	Selects NTSC setup level.
	00	<75> Select this function when using 7.5 % setup signals.
		(Adjusts the interior of the monitor to the 7.5 % setup level to
		suit the black level)
		<00> Select this when there is no setup signal.
PC		Performs analog PC settings.(PCJ page 22)

21