Detaching and Attaching the Protective Panel

The LCD panel is covered by a protective panel to protect it from damage during transportation. Remove the protective panel before use.

Groove

Protective panel screw

•The illustration shows an example for BT-L2150P/ 2150E.

indicates screws found only on BT-L2150P/ 2150E (not present on BT-L1500P/1500E)

Detaching the panel

1.Unscrew the protective panel screws (10 screws for BT-L2150P/2150E, 8 for BT-L1500P/1500E) using a Phillips screwdriver while supporting the protective panel with your hand.

2.Detach the protective panel.

•After detaching, please store the protective panel and the protective panel screws.

Attaching the panel

Verify the top and bottom of the protective panel before attaching.

1.Align the screw holes on the protective panel with those on the unit.

• Fit the protective panel into the groove on the unit.

2.Using a Phillips screwdriver, screw the protective panel screws (10 screws for BT- L2150P/2150E, 8 for BT-L1500P/1500E) to screw the protective panel to the unit.

•The protective panel may crack if it is screwed too tight. (Screwing torque: Tighten to about 30 N cm or less)

26