35
Main Menu (continued)
“GPI CONTROL” is used to enable and disable GPI functions and assign functions to each of the GPI terminal pins
( page 48).
Underlined values indicate factory defaults.
Note:
This function is not available when,
•“SD ASPECT” operation when input signal is HD or PC
•“SCAN” operation when the input signal is PC
•“GAMMA SELECT” operation when the input signal is PC
•“SELECT SYNC” operation when anything other than “RGB-VIDEO” is sel ected under “YPBPR/RGB” in the
“INPUT SELECT” menu
•“MONO” operation when input signal is PC
GPI
Sub menu Settings Description
GPI CONTROL DISABLE
ENABLE
Enables and disables GPI functions
<DISABLE> Disabled
<ENABLE> Enabled
GPI1 - GPI8 UNDEF
MARKER1 ON/OFF
MARKER2 ON/OFF
MARKER BACK
HALF
MARKER BACK
BLACK
CENTER MARKER
INPUT SEL. VIDEO
INPUT SEL. SDI1
INPUT SEL. SDI2
INPUT SEL.
YPBPR/RGB
INPUT SEL. DVI-D
SD ASPECT
SCAN
R-TALLY
G-TALLY
MONO
GAMMA SEL. FILM
GAMMA SEL.
STDIO/PST
SELECT SYNC
Assigns functions to the GPI control terminal pins.
The same items can be set to each termi nal (page
48).