36
Main Menu (continued)
Underlined values indicate factory defaults.
*1 All five input lines (VIDEO, SDI1, SDI2, YPBPR/RGB, DVI-D) cannot be turned off. An attempt to turn off all
inputs ends when the fourth input line is tur ned off since it will not be possible to turn off the 5th input line also.
*2 “AUTO” is the factory default, but select a specific format when there is risk that the input sig nal may be
contaminated by outside noise.
INPUT SELECT
Sub menu Settings Description
VIDEO OFF
ON
Turns VIDEO line to the INPUT button on/off. *1
FORMAT AUTO
NTSC
PAL
Selects the video input format.*2
<AUTO> Automatically selects NTSC or PAL.
<NTSC> NTSC <PAL> PAL
NTSC SETUP 75
00
Selects NTSC setup level.
<75> Select this function when using 7.5% setup signa ls.
(Adjusts the interior of the monitor to the 7.5% setup
level to suit the black level)
<00> Select this when there is no setup signal.
SDI1 OFF
ON
Turns SDI1 line to the INPUT button on/off.
*1
SDI2 OFF
ON
Turns SDI2 line to the INPUT button on/off.
*1
YPBPR/RGB OFF
ON
Tur ns YP
B
P
R
/RGB line to the INPUT button on/off.
*1
MODE YPBPR
RGB-VIDEO
RGB-COMP.
Selects YPBPR (component) or RGB input mode.
<YPBPR> Selects the YPBPR signal.
<RGB-VIDEO> Selects the video RGB signal.
<RGB-COMP.> Selects the PC RGB signal.
COMPONENT
LEVEL
SMPTE
B75
B00
Selects
YPBPR
(component) signal input level.
<SMPTE> Signal level complies with SMPTE and PB and PR are
0.7 Vp-p at 100% chroma.
<B75> Select this when connecting a Betacam or sim ilar
device with a setup function. (Adjusts the interior of
the monitor to the 7.5% setup level to suit the black
level)
<B00> Select this when connecting a Betacam or sim ilar
device without a setup function.
SELECT SYNC INT
EXT
Selects the sync signal when using YPBPR and RGB-VID EO input.
<INT> S elect when the synchronizing signal is
superimposed on the G or Y signal.
<EXT> Select to synchr onize with an external synchronizing
signal.
COMP. Performs analog PC settings. (“COMP.” page 37)
DVI-D OFF
ON
Turns DVI-D line to the INPUT button on/off. *1
MODE DVI- VI DEO
DVI- CO MP.
Selects DVI-D input mode.
<DVI-VIDEO> Selects the RGB signal input of RGB video.
<DVI-COMP.> Selects PC input.