Hard Disk Data Erase Utility
When disposing the computer or transferring the ownership, erase all hard disk data in order to avoid data leakage. Even if you erase the data or initialize the hard disk using normal Windows commands, the data can be read with some special software. Use the hard disk data erase utility to erase the data completely.
Note that transferring of the ownership without uninstalling the commercial software will be a violation of the software’s license agreement.
The hard disk data erase utility erases data using an overwriting method, but there is a possibility that due to mal- functions or other operational errors, data may not be completely erased. There are also specialized devices that may be able to read data that has been erased using this method. If you need to erase highly confidential data, we recommend that you contact a company that specializes in this process. Matsushita Electric Industrial Co., Ltd. will bear no responsibility for losses or damages suffered as a result of the use of this utility.
CAUTION
zWhen the hard disk contains the Recover Pro backup data, the Recover Pro backup area is lost as well.
NOTE
zThis utility cannot erase data for specific partitions.
Preparation
zPrepare the following items:
y The Product Recovery
y Panasonic USB CD/DVD drive (optional) (refer to recent catalogs and other sources for information about the products available)
zRemove all peripherals (except for the CD/DVD drive).
zConnect the AC adaptor and do not remove it until hard disk data erase is complete.
1 | Turn off the computer and connect the CD/DVD drive to the USB port ( page 11). | ||
2 | Turn on the computer, and press |
| several times while [Panasonic] boot screen is dis- |
F2 | |||
| played. | ||
The Setup Utility starts up.
z If the password is requested, enter the Supervisor Password.
3Select the [Boot] menu, then select [USB CDD] and press F6 until [USB CDD] is at the top of the boot priority order.
4Set the Product Recovery
5Press F10.
At the confirmation message, select [Yes] and press Enter.
The computer restarts.
6 Press 2 to execute [2. [Erase HDD]].
zTo cancel this operation, press 0.
7At the confirmation message, press Y.
8When [<<< Start Menu >>>] is displayed, press Enter.
The approximate time required for erasing data will be displayed.
9 Press Space.
At the confirmation message, press Enter.
The hard disk erase process starts. When the operation is completed, the [Hard disk data has been deleted.] message will appear. If a problem has occurred during the operation, an error message will appear.
zTo cancel partway, press Ctrl + C. The data erasure will be up to that point.
10Remove the Product Recovery
11Remove the CD/DVD drive.
Useful Information
21
