12 Turn on the computer, and press F2 several times while [Panasonic] boot screen is dis played.
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
13 Press F9.
At the confirmation message, select [Yes] and then press Enter.
The Setup Utility settings excluding the password(s) will return to the default values.
14 Select the [Exit] menu and then select [Save Current Values], then press Enter.
At the confirmation message, select [Yes] and press Enter.
15 Turn the computer off by using the power switch.
zIf additional instructions are included with the computer, be sure to read them. It may be necessary to per form additional operations during the following procedure.
16 | Perform the |
17 | Start the Setup Utility and change the settings as necessary. |
Useful Information
23
