N
E Anti-Theft System
G
L
I
SThis unit is equipped with a removable face plate. Removing this face plate makes the radio totally inoperable.
H
The security indicator will blink.
15
Place the Removable Face Plate into Case
1Switch off the power of the unit.
2Remove the removable face plate. (➡ page 23)
3 Gently press the button of the case and open the cover. Place the face plate into the case and take it with you when you leave the car.
Install Removable Face Plate
1Fit the face plate with its left hole on one of the pins provided on the main unit.
2Fit the other hold on the other pin applying slight pressure.
3Move the face plate up and down a few times to make sure it is secure. Then close the front panel and press down the right side of the face plate until it clicks into plate.
Security Indicator
The security indicator blinks when the removable face plate is removed from the unit.
Press and hold [SEL] to turn the security indicator on or off. (“LED ON” or “LED OFF”).
Default
Display | Security indicator |
|
|
Blinks
OFF
7 Removable face plate case |
|
| Contact |
3 | 2 |
| |
1 |
|
Security indicator |
Cautions:
≥This face plate is not
≥Do not remove the face plate while driving your car.
≥Do not place the face plate on the dashboard or nearby areas where the temperature rises to high level.
≥Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical contacts.
≥If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.
≥Do not apply a strong downward force onto the face plate and do not put anything on it while it is open, or it might be damaged.
24