![E](/images/new-backgrounds/11671/1167143x1.webp)
E
N
G
L
I
S
H
19
Troubleshooting (Continued)
❐CD
Trouble | Cause/Step |
Disc is upside down.
➡Place disc in the correct direction, and the label side up.
≥Disc is dirty.
Disc is in the CD compart- ment but no sound is made, or disc is ejected automatically.
≥Disc has scratches.
➡Clean disc, referring to the section on “Notes on CD/CD media
A disc that has data other than
➡Discs that have
➡The unit may not successfully play back a
≥Disc is dirty.
Sound skips, bad sound quality (e.g. caused by noise)
Sound skips due to vibra- tion.
Disc is not ejected.
Time is counted but no sound comes out.
≥Disc has scratches.
➡Clean disc, referring to the section on “Notes on CD/CD media
➡The unit may not successfully play back a
Mounting angle is over 30o.
➡Adjust mounting angle to less than 30o.
Instable mounting.
➡Mount the unit securely with the mounting parts, referring to the section on installation.
≥Disc is defective.
≥Mechanical trouble.
➡Press [OPEN] to open the panel and press [<] (EJECT). If normal operation is not restored yet, call the store where you purchased the unit or the near- est Servicenter to ask for repairs.
The first track of a mix mode disc was reproduced. (Mix mode is a format in which data except music is recorded on the first track and music data is recorded on other than the first track in a session.)
➡Play back music data recorded on other than the first track.
❐Sound Setting
No sound from left, right, front or rear speakers.
Left and right sounds are reversed in stereo listen- ing.
28
Left and right balance, or front and rear balance is off on one side.
➡Adjust balance/fader mode as appropriate.
Cables are not correctly connected.
➡Connect the cables correctly.
The right speaker wire is connected to the left speaker and the left speaker wire to the right speaker.
➡Connect the speaker wires to the correct ones.