Panasonic CQ-RG131W Power and Sound Controls

CQ-RG131W

4

E

N

G

L

I

S

H

1

Power and Sound Controls

CQ-RG131W

LOUD

Power

Turn the key in the ignition until the accessory indicator lights.

Press [PWR]to switch on the power.

LOUD

Volume

●Press [VOLjj] or[VOLii]to increase or decrease volume.

0 to 39

Volume Level

●Press [VOLjj] or [VOLii]for more than 0.5 second to change

numeric levels on the display rapidly.

CQ-RG131W

LOUD

CQ-RG131W

LOUD

Mute

●Press [MUTE]mute the sound completely.

●“MUTE” blinks while this operation.

●Press [MUTE]again to cancel.

Tone Enhancement

●Press and hold [MUTE] (LOUD) for more than 2 seconds to

enhance bass and treble tones when listening at low or medium

volume.

●Press and hold [MUTE] (LOUD) for more than 2 seconds again

to deactivate when listening at higher volumes.

Note: This unit is equipped with an anti-volume-blast circuit which serves as an automatic

volume level adjuster so that you will not be deafened with sudden loud volume.

This system operates as follows. When [PWR]is switched on, the volume level is low. After that,

the volume level gradually returns to the level as the same as the one before turning off.

Anti-volume-blast circuit is not effective when volume level is lower than position 20 at the display.

Press and hold

Contents

Main Contents Precautions Page Power and Sound Controls Power Volume Mute Tone Enhancement Changing Audio Modes Bass and Treble Balance Fader Radio Basics Change to the tuner mode Selecting a Band Manual Tuning Seek Tuning Manual Station Preset Auto Preset Memory Preset Station Setting Tuning in a Preset Station Cassette Tape Player Basics Loading a Cassette Rewind and Fast Forward Changing Sides Stopping and Ejecting the Tape Notes on Cassette Tapes CD Changer Basics To Changer mode Selecting a Disc Selecting a Track Error Display Messages Searching a Track Repeating a Track Random Selection Scanning Tracks Scanning Discs Clock Basics (The clock system is 12-hours.) Initial Time Setting Resetting the Time Selecting the Clock Display Installation Guide Supplied Hardwares Preparation Fig. 1 182 mm Installation Guide 2. Secure the rear of the unit. Using the Rear Support Strap 3. After installation reconnect the negative () battery terminal. Using the Rubber Cushion (Option) To Remove the Unit Fig. 1 Fig. 2 Fig. 4 Fig. 3 Anti-Theft System To Remove the Removable Face Plate Fig. 7 Fig. 6 Fig. 5 To install the Removable Face Plate Fig. 8 Fig. 9 E N G L I S H 15 () Electrical Connection DP88N). Cautions: all cables and keep cable terminals free from touching any metal parts. Speaker Connections (Gray) RIGHT RIGHT Unit will be damaged if speakers (Front, Rear) are not connected properly. Troubleshooting Specifications Fuse Maintenance Page Page MONO Page Page Page Page Page Page Page ( ) Page Page Page () 1. 2. 40 W 3. 4 8 4. BTCL 5. ( 30 cm 6.