Panasonic CQ-RG131W Clock Basics

CQ-RG131W

Clock Basics

(The clock system is 12-hours.)

CQ-RG131W

LOUD

Initial Time Setting

Press [DISP]. “AdJ” is displayed.

Press and hold [DISP] again for more

than 2 seconds. “12” blinks indicating

the time setting mode is activated.

To set hours, press [jj]or [ii].

Press [DISP]again for minute setting.

To set minutes, press [jj]or [ii].

Hold [jj]or [ii]to change numbers

rapidly.

When you have set the time, press

[DISP].

Resetting the Time

When you want to reset the time, press and hold [DISP]for more

than 2 seconds to activate the time setting mode. Then, repeat

step to above.

Selecting the Clock Display

Press [DISP]for clock display.

Press [DISP] once again, the current audio display mode

resumes.

LOUD













Press and hold

Contents

Main Contents Precautions Page Power and Sound Controls Power Volume Mute Tone Enhancement Changing Audio Modes Bass and Treble Balance Fader Radio Basics Change to the tuner mode Selecting a Band Manual Tuning Seek Tuning Manual Station Preset Auto Preset Memory Preset Station Setting Tuning in a Preset Station Cassette Tape Player Basics Loading a Cassette Rewind and Fast Forward Changing Sides Stopping and Ejecting the Tape Notes on Cassette Tapes CD Changer Basics To Changer mode Selecting a Disc Selecting a Track Error Display Messages Searching a Track Repeating a Track Random Selection Scanning Tracks Scanning Discs Clock Basics (The clock system is 12-hours.) Initial Time Setting Resetting the Time Selecting the Clock Display Installation Guide Supplied Hardwares Preparation Fig. 1 182 mm Installation Guide 2. Secure the rear of the unit. Using the Rear Support Strap 3. After installation reconnect the negative () battery terminal. Using the Rubber Cushion (Option) To Remove the Unit Fig. 1 Fig. 2 Fig. 4 Fig. 3 Anti-Theft System To Remove the Removable Face Plate Fig. 7 Fig. 6 Fig. 5 To install the Removable Face Plate Fig. 8 Fig. 9 E N G L I S H 15 () Electrical Connection DP88N). Cautions: all cables and keep cable terminals free from touching any metal parts. Speaker Connections (Gray) RIGHT RIGHT Unit will be damaged if speakers (Front, Rear) are not connected properly. Troubleshooting Specifications Fuse Maintenance Page Page MONO Page Page Page Page Page Page Page ( ) Page Page Page () 1. 2. 40 W 3. 4 8 4. BTCL 5. ( 30 cm 6.