Panasonic CQ-VW100W Dimmer, Display, Aspect, Contrast, Bright, Color, Tint, Settings continued

Settings (continued)

English	Basic Setting	Screen Sound Disc Radio
	Note:	(Display)

¡The screen setting screen can be also activated by

31touching Screen when the button is displayed. (a page 12)

Dimmer

Adjusting the brightness

1 2 3

Darker Brighter

default: 1

Note:

¡When [DIMMER] is pressed, the screen brightness is toggled between the set level that is adjusted by the procedure above and the maximum luminance.

Display

Display appearance

Contrast (Adjust the image contrast)

] : decreases the contrast between black and white.

[ : increases the contrast between black and white.

Aspect

Display aspect setting

Normal		¡The conventional display image
		has a 4 to 3 ratio of horizontal to
		vertical.
		¡In this case, a blank area remains
		on the right and left sides of the
		display.
		¡The screen is extended horizontally
	Full
		as a whole to the aspect ratio of 16
		to 9.
		¡The extension ratio is the same at
		any point of the screen.
		¡The screen is fully extended at the
Zoom
		normal aspect ratio of 4 to 3.
		¡The top and bottom of the screen
		are slightly cut.
		¡The screen is extended horizontally
	Just
		to the aspect ratio of 16 to 9.
		¡The extension ratio increases
		toward the right and left ends of
		the screen.
		default:
			Normal

Bright

] : darkens.

[ : lightens.

Color

(Adjust the image brightness)

(Adjust the image color depth)

Note:

¡The aspect setting screen can be also activated by touching Aspect when the button is displayed.

(a page 12)

¡This adjustment is common to video mode.

¡You cannot change the aspect in the menu screen and a screen in the CD, MP3 and radio mode. These are fixed to “Full”.

] : lightens the depth of color on the display.

[ : deepens the depth of color on the display.

Tint (Adjust the image tone or tint)

] : emphasizes green in the color image.

[ : emphasizes red in the color image.

Note:

¡When the video signal is PAL/SECAM format, adjust- ment cannot be performed.

Setting range: –15 to +15 default: ±0

¡When the rear view camera is in operation with the transmission gear shift in the reverse position, the image is shown on the “Full” screen only.

¡In some cases, the picture looks different from the original one due to your selection of aspect.

Caution

¡This is to remind you that compression or extension of the screen using the aspect ratio (screen mode) changing function of this product for commercial purpose of profit making or viewing/listening by the public could infringe on the rights of the author pro- tected by the copyright law.

¡If you expand normal picture (4 to 3) by using “Just”, “Zoom” or “Full” aspect to the full of the screen, you might not see the periphery of the pic- ture, or you might see a distorted picture. Therefore, use the “Normal” mode to see the origi- nal picture as the author intended it.

32

CQ-VW100W