Panasonic CQ-VW100W manual Troubleshooting, If You Suspect Something Wrong, Common, English

Models: CQ-VW100W

1 46
Download 46 pages 6.17 Kb
Page 37
Image 37
Troubleshooting

Troubleshooting

If You Suspect Something Wrong

Check and take steps as described below.

If the described suggestions do not solve the problem, it is rec- ommended to take the unit to your nearest authorized Panasonic Service Center. The product should be serviced only by qualified personnel. Please refer checking and repair to professionals. Panasonic shall not be liable for any accidents arising out of neg- lect of checking the unit or your own repair after your checking.

Never take measures especially those other than indicated by italic letters in “Possible Solution” described below because those are too dangerous for users to handle themselves.

❑If You Suspect Something Wrong Warning

¡Do not use the unit in an irregular condi- tion, for example, without sound, or with smoke or a foul smell, which can cause ignition or electric shock. Immediately stop using the unit and consult your dealer.

¡Never try to repair the unit by yourself because it is dangerous to do so.

English

36

Common

Problem

No power to the unit

Sound is not

generated.

Noise

Noise is made in step

with engine revolutions.

Some operations are not

executable.

No sound from

speaker(s)

The speaker channels are reversed between right and left.

The power of the unit fails unintentionally.
Possible cause a Possible solution

The power cord (battery, power and ground) is connected in the wrong way. aCheck the wiring.

Fuse blows out.

aEliminate the cause of fuse blowout and replace the fuse with new one. Consult your dealer.

MUTE is set to ON.

aSet MUTE to OFF.

The wiring of speaker lines is not correct, or a break or poor contact arises.

aCheck the wiring in accordance with the wiring diagram. (Installation Instructions)

There is an electromagnetic-wave generator such as a cellular phone near the unit or its electrical lines.

aKeep the electromagnetic-wave generator such as a cellular phone away from the unit and the wiring of the unit. In case noise cannot be eliminated due to the wiring harness of the car, consult your dealer.

The contact of the ground lead is poor.

aMake sure that the ground lead is connected to an unpainted part of the chassis securely.

Alternator noise comes from the car.

aChange the wiring position of the ground lead. aMount a noise filter.

Some operations are not executable in particular modes such as menu mode.

aRead the operating instructions carefully and cancel the mode. If the unit is still out of order, consult your dealer.

There is a break, a short circuit, poor contact or wrong wiring regarding the speaker wiring.

aCheck the speaker wiring.

The speaker wiring is reversed between right and left.

aPerform the speaker wiring in accordance with the wiring diagram.

The safety device works.

aConsult your dealer, or your nearest Panasonic Service Center.

CQ-VW100W

37

Page 37
Image 37
Panasonic CQ-VW100W Troubleshooting, If You Suspect Something Wrong, Common, executable No sound from speakers, English