9.Secure the wire onto the control board with the holder (clamper).
10.After completing wiring connections, reattach the particular plate and control board cover (metal and resin) to the original position with the screws.
11.For wire stripping and connection requirement, refer to instruction g of indoor unit.
This equipment must be properly earthed.
o Earth lead wire shall be Yellow/Green (Y/G) in colour and longer than other lead wires for electrical safety in case of the slipping.
10.2.4.5Piping Insulation
1.Please carry out insulation at pipe connection portion as mentioned in Indoor/Outdoor Unit Installation Diagram. Please wrap the insulated piping end to prevent water from going inside the piping.
2.If drain hose or connecting piping is in the room (where dew may form), please increase the insulation by using
46
