Setting the Fan Speed

• Press 4 to select:-

FAN

 

 

 

 

 

 

 

 

 

 

Low Fan Speed

FAN

 

 

 

 

 

 

 

 

 

 

Medium Fan Speed

 

 

 

 

 

 

 

 

 

 

 

 

 

FAN

 

 

 

 

 

 

 

 

 

 

High Fan Speed

 

 

 

 

 

 

 

 

AUTO

FAN – Automatic Fan Speed

The speed of the indoor fan is adjusted automatically according to the operation. The indoor fan stops occasionally during cooling operation.

Setting the Vertical Airflow Direction

• Press 5 or 6 to select:-

Cooling Model

COOL / DRY Operation

FAN Operation

AUTO

AUTO

Setting the Horizontal Airflow Direction

POWER QUIIET

TIIMER

ECONOMY POWERFUL

Adjust it manually

Use this air conditioner under the following conditions:

Cooling Model

(Unit in °F)

DBT: Dry Bulb Temp

Indoor

Outdoor

 

 

WBT: Wet Bulb Temp

DBT WBT DBT WBT

 

Operation DetailsCOOL – Cooling Operation

To set the room temperature at your preference cooling comfort.

AUTO – Automatic Operation

Sense indoor temperature to select the optimum mode.

Temperature is not displayed on the remote control during AUTO operation.

DRY – Soft Dry Operation

A very gentle Cooling Operation, prior to dehumidification. It does not lower the room temperature.

During Soft Dry operation, the indoor fan operates at Low fan speed.

HEAT – Heating Operation

(for Heat Pump Model only)

ENGLISH

36°

Swing up/down

Automatically

MANUAL

Five stages of adjustment can be made between 14 ~ 36 angle.

61°

Move up/down

Automatically

MANUAL

Five stages of adjustment can be made between

0 ~ 61 angle.

Maximum Temperature

89.6

73.4

109.4

78.8

 

 

 

 

 

Minimum Temperature

60.8

51.8

60.8

51.8

Heat Pump Model

(Unit in °F)

DBT: Dry Bulb Temp

Indoor

Outdoor

 

 

Heat is obtained from outdoor air to warm up the room. When the outdoor ambient air temperature falls, the heating capacity of the unit might be reduced.

Defrosting Operation

Depending on the outdoor temperature, the operation occasionally stops to melt the frost on the outdoor unit.

FAN – Air Circulation Operation

Heat Pump Model

COOL / DRY Operation

HEAT Operation

AUTO

 

AUTO

 

 

 

 

 

– When the discharge air

 

 

 

 

 

 

 

 

temperature is low such

 

 

 

 

as at the start of heating

36°

 

 

operation, the air blows

 

 

in a horizontal direction.

 

 

 

 

 

 

 

 

As the temperature

Swing up/down

rises, the hot air blows

in a downward direction.

Automatically

– To stop this operation,

 

 

 

 

 

 

 

 

press MANUAL.

 

 

 

 

 

 

 

MANUAL

 

 

MANUAL

 

Five stages of adjustment

Five stages of adjustment

can be made between

can be made between

14 ~ 36 angle.

0 ~ 61 angle.

WBT: Wet Bulb Temp

DBT

WBT DBT

WBT

 

 

 

 

 

 

Maximum Temperature-Cooling

89.6

73.4

109.4

78.8

(Maximum Temperature-Heating)

(86)

(–)

(75.2)

(64.4)

 

 

 

 

 

Minimum Temperature-Cooling

60.8

51.8

60.8

51.8

(Minimum Temperature-Heating)

(60.8)

(–)

(23)

(21.2)

 

 

 

 

 

Notes

If the unit is not going to be used for an extended period of time, turn off the main power supply. If it is left at the ON position, approximately 2.5 W of electricity will be used even if the indoor unit has been turned off with the remote control.

If operation is stopped, then restart immediately, the

unit will resume operation only after 3 minutes.

(for Cooling Model only)

When the room temperature reaches the set temperature, operation commences at Low airflow volume. It stops when the room temperature drops to 4°F below the set temperature.

(It is useful when using a heater).

Hi fan speed will not operate when using the air circulation Fan mode.

6